blu commented on issue starred/frigate-blakeblackshear-2#4502 2026-02-06 12:47:16 -08:00
[HW Accel Support]: High CPU Usage and Low FPS in Frigate on Orange Pi 5 Plus with RK3588

@ThisIsLamer commented on GitHub (Jan 5, 2024):

I made all the changes and this is the result I got

It seems that two cores are loaded again, but not fully, and they manage a framerate of…

blu commented on issue starred/frigate-blakeblackshear-2#4502 2026-02-06 12:47:16 -08:00
[HW Accel Support]: High CPU Usage and Low FPS in Frigate on Orange Pi 5 Plus with RK3588

@NickM-27 commented on GitHub (Jan 5, 2024):

worth mentioning that the 2688x1520 stream is being scaled down to 1280x720 here which uses software on the rockchip so that is likely part of the usage

blu commented on issue starred/frigate-blakeblackshear-2#4502 2026-02-06 12:47:15 -08:00
[HW Accel Support]: High CPU Usage and Low FPS in Frigate on Orange Pi 5 Plus with RK3588

@MarcA711 commented on GitHub (Jan 5, 2024):

Hi,

all devices seem to be present. So, hardware acceleration should work now.

Could you try out this docker-compose.yml:

blu commented on issue starred/frigate-blakeblackshear-2#4502 2026-02-06 12:47:13 -08:00
[HW Accel Support]: High CPU Usage and Low FPS in Frigate on Orange Pi 5 Plus with RK3588

@ThisIsLamer commented on GitHub (Jan 5, 2024):

I would also like to add that after launching the stable version of the application, which has no support for Rockchip chips, the CPU load is…

blu commented on issue starred/frigate-blakeblackshear-2#4502 2026-02-06 12:47:11 -08:00
[HW Accel Support]: High CPU Usage and Low FPS in Frigate on Orange Pi 5 Plus with RK3588

@ThisIsLamer commented on GitHub (Jan 4, 2024):

I understand that this question might be slightly off-topic for Frigate, but I am encountering difficulties in enabling hardware acceleration on…

blu commented on issue starred/frigate-blakeblackshear-2#4502 2026-02-06 12:47:11 -08:00
[HW Accel Support]: High CPU Usage and Low FPS in Frigate on Orange Pi 5 Plus with RK3588

@ThisIsLamer commented on GitHub (Jan 4, 2024):

You can also see from the log that there were problems launching npu

the container is running in privileged mode

docker-compose.yml

blu commented on issue starred/frigate-blakeblackshear-2#4502 2026-02-06 12:47:11 -08:00
[HW Accel Support]: High CPU Usage and Low FPS in Frigate on Orange Pi 5 Plus with RK3588

@NickM-27 commented on GitHub (Jan 4, 2024):

CC @MarcA711

blu commented on issue starred/frigate-blakeblackshear-2#4502 2026-02-06 12:47:11 -08:00
[HW Accel Support]: High CPU Usage and Low FPS in Frigate on Orange Pi 5 Plus with RK3588

@MarcA711 commented on GitHub (Jan 5, 2024):

Hey ThisIsLamer,

What does ls /dev/dri return? Does it include renderD128 renderD129? (renderD129 is your VPU used to decode frames from your…

blu commented on issue starred/frigate-blakeblackshear-2#4502 2026-02-06 12:47:11 -08:00
[HW Accel Support]: High CPU Usage and Low FPS in Frigate on Orange Pi 5 Plus with RK3588

@ThisIsLamer commented on GitHub (Jan 5, 2024):

Hello, MarcA711.

I tried running the image you recommended, attempted to write it to emmc using RKDevTools, and to a flash drive using…

blu commented on issue starred/frigate-blakeblackshear-2#4503 2026-02-06 12:47:10 -08:00
[Config Support]: Reolink Doorbell 2K

@Dinth commented on GitHub (Jan 4, 2024):

I have updated it to match the reolink config in the doc:

blu commented on issue starred/frigate-blakeblackshear-2#4502 2026-02-06 12:47:10 -08:00
[HW Accel Support]: High CPU Usage and Low FPS in Frigate on Orange Pi 5 Plus with RK3588

@ThisIsLamer commented on GitHub (Jan 4, 2024):

I also found this error, if you run…

blu commented on issue starred/frigate-blakeblackshear-2#4504 2026-02-06 12:47:10 -08:00
[Support]: Significant jump in CPU usage from 0.12.1 to 0.13.0-rc1

@daernsinstantfortress commented on GitHub (Jan 4, 2024):

Thanks - I'll look at this later today and will report back.

blu commented on issue starred/frigate-blakeblackshear-2#4502 2026-02-06 12:47:10 -08:00
[HW Accel Support]: High CPU Usage and Low FPS in Frigate on Orange Pi 5 Plus with RK3588

@NickM-27 commented on GitHub (Jan 4, 2024):

Please read the docs, you are not using the GPU for decoding and not using the npu for object detection so it's no surprise CPU usage is high

blu commented on issue starred/frigate-blakeblackshear-2#4504 2026-02-06 12:47:10 -08:00
[Support]: Significant jump in CPU usage from 0.12.1 to 0.13.0-rc1

@belmont commented on GitHub (Jan 7, 2024):

0.13 has extremely good detection ! Night detection never worked well enough with frigate for me until 0.13. Kudos to devs! Side note i use nvidia GPU…

blu commented on issue starred/frigate-blakeblackshear-2#4503 2026-02-06 12:47:10 -08:00
[Config Support]: Reolink Doorbell 2K

@NickM-27 commented on GitHub (Jan 4, 2024):

localhost:8443 is incorrect, should be 8554

blu commented on issue starred/frigate-blakeblackshear-2#4504 2026-02-06 12:47:10 -08:00
[Support]: Significant jump in CPU usage from 0.12.1 to 0.13.0-rc1

@daernsinstantfortress commented on GitHub (Jan 9, 2024):

I've continued to monitor and the CPU load increase has steadied out to not be as high as initially feared, especially given the…

blu commented on issue starred/frigate-blakeblackshear-2#4503 2026-02-06 12:47:10 -08:00
[Config Support]: Reolink Doorbell 2K

@Dinth commented on GitHub (Jan 4, 2024):

Thanks! I dont know how this happened or where the 8443 came from :(

blu commented on issue starred/frigate-blakeblackshear-2#4504 2026-02-06 12:47:07 -08:00
[Support]: Significant jump in CPU usage from 0.12.1 to 0.13.0-rc1

@blakeblackshear commented on GitHub (Jan 4, 2024):

In almost all cases, this has been due to the increased sensitivity of motion detection in 0.13.

Default values have been changed for…

blu commented on issue starred/frigate-blakeblackshear-2#4502 2026-02-06 12:47:06 -08:00
[HW Accel Support]: High CPU Usage and Low FPS in Frigate on Orange Pi 5 Plus with RK3588

@ThisIsLamer commented on GitHub (Jan 4, 2024):

I noticed that for my camera, ffmpeg is launched with the following parameters: